|
Metal Coatings |
|
Metal Coat 901 |
Metal Coat 901 - UV and mildew resistant, acrylic
coating that waterproofs and stops corrosion. This ceramic coating
controls radiant heat and insulates roofs, walls and many more other metal
surfaces. |
| Rust Converter
Metal Coat 901H |
Rust
Converter Metal Coat 901H - When applied directly to rust, this
acrylic coating will convert iron oxide (rust) into iron sulfate upon
contact preventing further rusting problems |
|
Roof Coatings |
|
Pond Coat 30 |
Pond
Coat 30™ - A UV resistant acrylic coating designed for concrete
and flat roofs. Will hold ponding water and has superior resistance
against mildew. Ceramics in this coating give it the ability to save on
energy costs. |
|
Rubber Coat 20 |
Rubber Coat 20 - UV resistant, urethane coating that has superior
adhesion for single ply roof systems. A very cost effective method for
stopping leaks and further degradation. |
| Comp Coat 80 |
Comp Coat
80 - A combination of acrylic resins designed to bond to
composition shingles. This coating waterproofs shingles while keeping them
soft, pliable and intact. Use CTE-6 as a top coat. |
|
Wall Coatings |
|
Exterior Wall Coat 3 |
Exterior Wall Coat 3 - Excellent UV resistant
wall coating that does not chalk and remains color fast for many years.
Prevents water from penetrating through the substrate. |
| Interior Wall Coat
40 |
Interior
Wall Coat 40 - Acrylic wall coating that has excellent
adhesion and prevents mildew growth. Available in many tints and shades.
It's radiant barrier properties will keep the heat in rooms in cold
climates. |
|
Clear Coatings |
|
Clear Coat 50 |
Clear Coat 50 - This clear acrylic coating is designed
to seal concrete, wood, and many other substrates for that natural look on
building facades. Also used as a rust inhibitor. |
|
Masonry Sealer 500 |
Masonry Sealer 500 - Protects concrete, masonry, stucco and other cementious materials from damage due to water and waterborne chemicals. A
penetrate that waterproofs within four hours. UV resistant. |
| Poly Coat 5050 |
Poly
Coat™ 5050 - A waterborne polyurethane coating that protects
exterior wood decks from water damage. High gloss retention, UV resistant,
impact and slip resistant. Leaves wood in its natural color. Used for
waterproofing concrete, brick, and many other substrates. |
|
Specialty Products |
|
Foam Coat 5 |
Foam
Coat 5 - Is an emulsion of high grade acrylic resins and solids in
water. Yields a tough, non-yellowing water repellent surface. Exceptional
adhesion to E.P.S. and E.P.P. with flexibility, low V.O.C. and safe. |
| High Temp 350 |
High
Temp 350 - An emulsion of acrylics designed for
substrate that reach temperatures of 350o F without polymerization
breakdown. Excellent coating for the protection of accidental contact by
employees on boilers, steam pipes, and many other areas. |
|
Floor & Walkway Coatings |
|
CERATECH
carries many floor, walkways and stripe coating systems. Designed in both
water-borne and epoxy base. These systems offer high enhanced corrosion
control capabilities. From swimming pool decks to paper mills and smelting
plants. CERATECH Floor and Walkway Systems will perform to your
satisfaction. |
|
Street Stripe 60 |
Street Stripe 60
- is an emulsion of high grade acrylic resins in water. It is
specially designed for heavy-duty traffic conditions common to
concrete and asphalt surfaces. |
| Cool Deck 70 |
Cool
Deck 70 - Is an emulsion of high grade resins in water. It is
specially designed and formulated for conditions common to pool decks and
walkway surfaces. Dries quickly to yield an exceptionally high abrasion
resistant coating that will stand up to most any heavy traffic areas. |
